So now the fun begins! Before I get on to detailed instructions of how to build the oven I want to provide some details on preparing the all important building material – the sand-clay mixture.
Ingredients
- Builders sand
- Clay
- Water (optional)
Equipment
- Shovel
- Bucket
- Tarpaulin
- Thick plastic bags
- Wheelbarrow
- Wellington or other sturdy boots
- Legs!
You can buy builders sand from any building suppliers, some garden centres and DIY stores (e.g. B&Q). Either buy it in individual plastic bags or get a job-lot delivered – you will use quite a lot.
What type of clay should I use?
I have had quite a few questions about the type of clay to use. As far as I know you can use any type of clay you can get your hands on. I dug my clay from a local farmer’s field here in Hampshire (clay overlying Upper Cretaceous chalk if you are geologically minded – maybe Paleogene?). The team at River Cottage get theirs from a pond on site, in Dorset (I think it is Blue Lias). If you can’t find any clay locally you could always buy potters clay which would be wonderfully homogeneous – free from large particulate matter. Which reminds me, try to get clay does not contain too many stones – they are liable to form the focus of cracks in your oven if left in the mixture.
Quantities
The ratio of clay to sand is 1:2 (one part clay to two parts sand). I used a bucket as a convenient measure and found that one bag of builders sand almost filled two buckets which was nice!
I think it is wise to make-up just enough mixture (with a little bit extra) to complete one layer of your oven at a time. Why? Well if you make up a huge batch (enough to complete your oven) it could dry out before you get a chance to use it if you get delays between layers (if it rains for example). So how much do you need for one layer? This will vary depending on the size of your oven. For mine, if we define one “batch” as two buckets of sand mixed with one bucket of clay, the first (oven) layer took three batches (6 sand to 3 clay). This left enough over to fill small cracks after drying and to begin building the chimney. The outer layer required more mixture because it is covered a larger surface area. I used four and a half batches for this layer.
Mixing or Puddling
Clay chunks distributed onto sand ready for puddling.
Mixing the clay and sand is by far the most tedious part of the whole build process. What you are trying to achieve is a well-mixed material with no pockets of unmixed sand or clay and the only way to do this seems to be by using your feet. The process is known as puddling and it goes like this:
- Spread a tarpaulin out on a firm surface (double it over in case you get holes in it).
- Tip two buckets of sand in a pile onto the tarpaulin and spread out a little.
- Next, fill another bucket with clay.
- Take a chunk of clay and break it into small pieces (thumb sized) and distribute them over the surface of the sand (like throwing broken-up pieces of mozzarella onto a pizza base!). Take this opportunity to dispose of any stones or sticks you might find in the clay.
-
Puddling Sand-Clay mixture with help from my dog Scout!
Wearing your boots, start to mix the sand using your feet (puddling). The best technique is to tread and twist. I recommend putting some music on and get into the groove! Seriously, you will look pretty daft doing this but you need to twist – Chubby Checker sty-lee! This is where a group of friends come in very handy. Many feet make light work of puddling sand and clay. It is great exercise though so keep reminding yourself how much good it is doing you when you start to get knackered and bored!
- Keep mixing until the clay lumps have disappeared then add more clay chunks and get back to puddling.
- Keep repeating this until the bucket of the clay is mixed into the sand.
I found it takes somewhere between 45 minutes to 1 hour to mix one batch. One tip I discovered which speeds things up is make sure the sand is damp before you start mixing. It definitely helps the clay mix in better (essentially you are coating sand grains with clay and water helps break down the clay bonds I assume?). Add some water before hand if you need to but dont go mad with it!
The last thing you need to do is check that the mixture is of the correct consistency i.e. not to wet and not too dry. You might be surprised at how sandy the mixture seems but this is how it is meant to be. The team at River Cottage HQ had a great method for testing the consistency though which I will share with you.
-
Sand - clay ball after drop test. It held together just right!
Grab a handful of mixture and form a ball about the size of a lime.
- Hold your arm directly out in front of your body at shoulder height.
- Drop the clay-sand ball onto hard ground in front of you.
The ball should hold together quite coherently. If it splats flat the mixture is too wet and you should add more sand to dry it out a little. If the ball breaks to pieces (explodes) it is too dry and you can add a little water. Simple!
Once you are happy that your mixture is just right shovel it into a thick plastic bag to keep it moist while you mix the next batch.
If you are ready to start building your first layer I recommend shoveling the final batch into a wheelbarrow for ease of use. Wheel it over to your plinth – it’s time to start building your oven!
The Clay Oven 